EMI CONDUCTIVE FOAM FOR RF SHIELDING ROOM RF DOOR HIGH QUALITY LOW PRICE
Foam gasket with conductive adhesive tape
Product features for foam gasket with conductive adhesive tape
1. Compact conductive fibers, no sharp edges
2. Good elasticity and consistency
3. Conductive adhesive
4. Low surface contact resistance
5. Shielding performance will not reduce after 10,000 times friction
6. Thin section suitable for I/O and D- subminiature lining
7. Could be used to ground connection
Name |
foam gasket with conductive tape |
Shielding effectiveness |
60-80dB/30MHz-1GHz |
Surface resistance |
<0.07ohms/sq inch |
Permanent deformation |
< 10% |
Temperature range |
-10~110°c |
Flammability |
UL 94(HF-1) |
Compression |
30-50% |
- Our technical team has more than 10 years’ experience in designing EMI filter. We know UL VDE CSA CE CQC etc safety standard very well.
- Our technical service team learn many kinds of test standard such as industrial application (IEC61800-3 for frequency inverter drive EN12015 for elevator EN55011 for ISM device etc) and military application (GJB151A GJB152A etc).We can solve EMI problem quickly effectively and low-costly.
- Our test equipment: LCR digital bridge/voltage proof tester/insulation resistance tester/spectrum analyzer/inductor tester/standard signal source/shield room/interference intensity tester etc
- Our product: EMI filter for general purpose/EMI filter for frequency inverter/EMI filter for shielding facility/EMI filter for military application
- Our advantage: high quality/high cost-effective/short lead time
- Our service: all products have two years guarantee
- Our main customers: frequency inverter drive and servo drive system/MRI shielding system/solar inverter system/rail transit system etc