Send Message
Changzhou Haozhuo Electronic Co., Ltd. 86-15206110683
EMC Chamber Ferrite Tile Absorber

EMC Chamber Ferrite Tile Absorber

  • High Light

    EMC Chamber Ferrite tiles


    6.7mm Ferrite tiles


    ferrite tile absorber

  • Type
    RC Filter
  • Transfer Function
    Low Pass
  • Package Type
    Surface Mount
  • Nominal Center Frequency
  • 3dB Bandwidth
  • Insertion Loss
  • Input Impedance
  • Stopband Attenuation
  • Base Size
  • Standard Height
    5.2mm, 6.7mm
  • Color
  • MOQ
    5 Sqm
  • Model Type
    Tile 52, Tile 67
  • Package
    With Plate
  • Port
  • Place of Origin
  • Brand Name
  • Certification
    CE RoHS
  • Model Number
  • Minimum Order Quantity
    >=1000 Pieces
  • Price
  • Packaging Details
    wooden case
  • Supply Ability
    1000 Piece/Pieces per Week

EMC Chamber Ferrite Tile Absorber

6.7mm thickness 100*100 Ferrite tiles for EMC Chamber


The key physical attributes of Ferrite within shielding is that it consists of domains with polarised bias and this rotates against the oscillating wave to absorb radiated energy. Ferrites are very good between the frequency range 30MHz to 800MHz with performance diminishing thereafter.


Ferrite Tile Size

· Base size: 100*100mm

· Standard height: 5.2mm, 6.7mm

· Diameter of bore: 10mm

Initial permeability 5500
Relative loss factor 15@0.1MHz
Saturation flux density 280(1194A/m)
Remanence 180
coercivity 3
Relative temp.factor 3
Curie temp. 90
Density 4.85*1000
Resistivity 100


30MHz -25.5dB
100MHz -38dB
300MHz -19.5dB
500MHz -16dB
700MHz -12dB
1000MHz -10dB

Ferrite Tile Application

· Used for EMC chamber

Based on the principle of having complex magnetic permeability equal (or nearly equal) to complex dielectric constant. Materials with this property exhibit an impedance equal to that of "free space" and therefore do not reflect radiated energy at normal incidence. Ferrite Tile can provide 10dB - 25dB of absorption between 30MHz and 1GHz. Tiles are thin (approximately 0.26 inches), but can be heavy (roughly 10 lbs per square foot).


Size for EMC chamber ferrite tile

· Base size: 100*100mm

· Standard height: 5.5mm, 6.7mm

· Diameter of bore: 10mm


Application for EMC chamber ferrite tile Used for EMC chamber


About US

  • Our technical team has more than 10 years’ experience in designing EMI filter. We know UL VDE CSA CE CQC etc safety standard very well.
  • Our technical service team learn many kinds of test standard such as industrial application (IEC61800-3 for frequency inverter drive EN12015 for elevator EN55011 for ISM device etc) and military application (GJB151A GJB152A etc).We can solve EMI problem quickly effectively and low-costly.
  • Our test equipment: LCR digital bridge/voltage proof tester/insulation resistance tester/spectrum analyzer/inductor tester/standard signal source/shield room/interference intensity tester etc
  • Our product: EMI filter for general purpose/EMI filter for frequency inverter/EMI filter for shielding facility/EMI filter for military application
  • Our advantage: high quality/high cost-effective/short lead time
  • Our service: all products have two years guarantee
  • Our main customers: frequency inverter drive and servo drive system/MRI shielding system/solar inverter system/rail transit system etc

EMC Chamber Ferrite Tile Absorber 0EMC Chamber Ferrite Tile Absorber 1