250VAC 25A feedthrough emi filter for anechoic chamber
When electronic devices have internal operating processes that rely on signals in this RF frequency spectrum, unintended results may occur if the ever-present RF or microwave electromagnetic radiation interacts with the device. This occurrence is otherwise known as electromagnetic interference (EMI).
EMI is a serious concern for devices that are externally powered (ones that have a plug) or require signal wires that need to extend outside the device (signal wires that might attach to sensors or input/output devices). The wires that connect to power sources, or I/O points, can act as antennas that will allow EMI to be received (coupled onto them) and enter the device. Once inside the device, EMI can then cause the device to perform improperly.
Feedthrough filters from us emc are used in very different areas including electromobility, shielded rooms, mobile radio base stations, medical technology, HF power supplies / switching power supplies, MRI rooms (Magnetic Resonance Imaging), RF microwave applications, HF generators, HF shielding technology, industrial control systems, railway technology, high-frequency welding equipment, elevator technology, tap-proof rooms, secure communication in industrial networks, radar applications, aviation 400 Hz - 800 Hz - 1000 Hz, UPS power supplies, computer and server rooms, radio communication equipment, interference suppression for AC applications 110 VAC - 230 VAC - 400 VAC, interference suppression for DC applications (e.g. battery systems), test stations for DC applications, EMC laboratories
We offers one of the largest and most trusted selections of EMI filtering components and assembly solutions for EMC compliance, energy efficiency, and power management, addressing both conducted and radiated EMI. We relies on proven experience to deliver reliable products for even the most rugged environments. Nenglv electromagnetic solutions are ideal for use in a variety of defense, aerospace, industrial, energy, commercial, and medical applications
Feedthrough filters are ideal for shielding applications and are very easy to install. Maximum reliability and a long service life are further features. Self-healing film capacitors provide good temperature stability and are very resistant to voltage peaks and failures in critical applications.
roduct Description
Ø Description:
n Feedthrough Capacitors offer a high insertion loss across a broad band of frequencies from
a few tens of kHz up to the GHz region
n Very low internal series idductance
n Very high self-resonant frequency
n Self-healing dielectric
n High quality and reliability
n Anti-twist protection
n Through-buikhead mounting
n Custom-specific or dual-versions on request
electrical feedthrough Low Pass power line filter
ØTypical Applications:
n AC Power line filter for 250VAC power lines
n DC Power line filter for 48VDC battery power
n Increasing system and information security
n Power supplies
n Swiching and cellular equipment
n computer servers
n UPS power supplies
n Medical equipment
n Shielded rooms
Ø Specification:
Product Name | electrical materials |
Model | PE7000 |
Rated voltage: | 250VAC |
80VDC~600VDC | |
Rated current: | 1A~250A |
Operating frequency | 50/60Hz |
Temperature range: | 40/085/56 |
Filter | Rated Current(A) | Rated Voltage(V) | Leakage Current(mA) | Capacitance( μF) | Test Voltage1min(VDC) |
16-M4 | 16 | 250 | 4.14 | 2*0.022 | 2250 |
63-M6 | 63 | 250 | 88.5 | 2*0.47 | 2250 |
100-M8 | 100 | 250 | 564 | 2*3.0 | 2120 |
100-M8 | 100 | 250 | 564 | 2*3.0 | 2200 |
250-M12 | 250 | 250 | 157 | 2*1.0 | 2250 |
30-M5 | 30 | 600 | - | 2*0.018 | 2500 |
50-M6 | 50 | 200 | - | 0.22 | 720 |
65-M6 | 65 | 200 | - | 2*4.7 | 1000 |
62-M6 | 65 | 250 | - | 2*0.25 | 2250 |