Send Message
Changzhou Haozhuo Electronic Co., Ltd. 86-15206110683
EMC Chamber RF Ferrite Tile Absorber Materials Electromagnetic

EMC Chamber RF Ferrite Tile Absorber Materials Electromagnetic

  • High Light

    Electromagnetic ferrite tile


    RF Absorber Ferrite Tile


    Ferrite Tile Material

  • Type
    RC Filter
  • Transfer Function
    Low Pass
  • Package Type
    Surface Mount
  • Nominal Center Frequency
  • 3dB Bandwidth
  • Insertion Loss
  • Input Impedance
  • Stopband Attenuation
  • Base Size
  • Standard Height
    5.2mm, 6.7mm
  • Color
  • MOQ
    5 Sqm
  • Model Type
    Tile 52, Tile 67
  • Package
    With Plate
  • Port
  • Place of Origin
  • Brand Name
  • Certification
    CE RoHS
  • Model Number
  • Minimum Order Quantity
    >=1000 Pieces
  • Price
  • Packaging Details
    wooden case
  • Supply Ability
    1000 Piece/Pieces per Week

EMC Chamber RF Ferrite Tile Absorber Materials Electromagnetic

6.7mm 5.5mm height EMC chamber ferrite tile for testing


Ferrite tiles are precision machined to have almost zero dimensional tolerance which helps in proper alignment of tiles, reduce gap between tiles resulting better performance and Normalized site attenuation of EMC chambers per ANSI C63.4 and applications per CISPR 16-1-4 and IEC 61000-4-3

  • Frequency range 30MHz to 1GHz
  • Typical reflectivity as high as -38dB
  • Impedance matched with DMC polyurethane and Polypropylene hybrid absorbers


Ferrite Tile Size

· Base size: 100*100mm

· Standard height: 5.2mm, 6.7mm

· Diameter of bore: 10mm

Initial permeability 5500
Relative loss factor 15@0.1MHz
Saturation flux density 280(1194A/m)
Remanence 180
coercivity 3
Relative temp.factor 3
Curie temp. 90
Density 4.85*1000
Resistivity 100


30MHz -25.5dB
100MHz -38dB
300MHz -19.5dB
500MHz -16dB
700MHz -12dB
1000MHz -10dB

Ferrite Tile Application

· Used for EMC chamber

Based on the principle of having complex magnetic permeability equal (or nearly equal) to complex dielectric constant. Materials with this property exhibit an impedance equal to that of "free space" and therefore do not reflect radiated energy at normal incidence. Ferrite Tile can provide 10dB - 25dB of absorption between 30MHz and 1GHz. Tiles are thin (approximately 0.26 inches), but can be heavy (roughly 10 lbs per square foot).


Size for EMC chamber ferrite tile

· Base size: 100*100mm

· Standard height: 5.5mm, 6.7mm

· Diameter of bore: 10mm


Application for EMC chamber ferrite tile Used for EMC chamber


About US

  • Our technical team has more than 10 years’ experience in designing EMI filter. We know UL VDE CSA CE CQC etc safety standard very well.
  • Our technical service team learn many kinds of test standard such as industrial application (IEC61800-3 for frequency inverter drive EN12015 for elevator EN55011 for ISM device etc) and military application (GJB151A GJB152A etc).We can solve EMI problem quickly effectively and low-costly.
  • Our test equipment: LCR digital bridge/voltage proof tester/insulation resistance tester/spectrum analyzer/inductor tester/standard signal source/shield room/interference intensity tester etc
  • Our product: EMI filter for general purpose/EMI filter for frequency inverter/EMI filter for shielding facility/EMI filter for military application
  • Our advantage: high quality/high cost-effective/short lead time
  • Our service: all products have two years guarantee
  • Our main customers: frequency inverter drive and servo drive system/MRI shielding system/solar inverter system/rail transit system etc

EMC Chamber RF Ferrite Tile Absorber Materials Electromagnetic 0EMC Chamber RF Ferrite Tile Absorber Materials Electromagnetic 1